Alte Untergath 40 · D-47805 Krefeld
Phone +49(0)2151/375-5
Fax +49(0)2151/375-95900

CEO: Harald M. Koch
Registered office: Krefeld
Registration office: Krefeld HRB 5401
VAT No. DE811215968

This email address is being protected from spambots. You need JavaScript enabled to view it.

> Contact

Gruppe 100/200 Spiral-DrahtgliedergurteSpiral-wire link belts Gr. 100 = spirals made of flat wire

Spiral-wire link belts Gr. 200 = spirals made of round wire

Properties of the belts

  • The spirals of these belts are alternately wound clockwise and anti-clockwise.
    A straight belt motion is achieved by that to a large extent.
  • Through the tightly wound spirals, there results a large total cross section. Therefore a high tensile load is possible.
  • In the case of belts which are driven through chains, this leads to possible small roll diameters and to a constrained leading of the belt achieving therewith a saving of space in the conveyor machine.


Dimensions & materials

(standard values)
Ø Spiral 1,2 x 0,7 ≠
and 1,0 Ø
6,0 x 3,0 ≠
and 5,0 Ø
Ø Cross rod 1,4 8,0
Pitch 6,5 50,8
(All specifications in mm)


  • Unalloyed / low-alloyed steels, bright or galvanized
  • Rust- and acid-resistant chrome and stainless steels
  • Heat-resistant chrome and stainless steels
  • Further materials on request



Possible belt edges and other applications

Bild_02 Bild_03 Bild_04 Bild_05
S = looped edge Sa = flattened looped edge B = bent edge K = welded head edge


Bild_06 Bild_07
RZK = scraping edge, chain and welded head edge Driving gear for bushing chain


Possible applications

  • Light to heavy items and bulk material.
  • Washing, cooling and freezing units, as well as baking-ovens
  • Bucket elevators
  • Tempering, annealing, compensation and sintering furnaces
  • As a discharge belt in washing and tempering baths.

The listing mentions only the most frequent applications.


Examples of possible applications

Bild_08 Bild_09
Belt No. 200/S in a baking-oven for bread Belt No. 250.8/RZK with pusher and perforated U-insertions as a discharge conveyor in a washing system for bolts
Bild_10 Bild_11
Round wire link belt No. 233/Sa in the high-temperature conveyor furnace for sintering of powder metal parts under inert gas atmosphere Round wire link belt No. 200/RK in the tempering furnace for steel parts.



Further information can be obtained as PDF-File download. (631 KB)

FaLang translation system by Faboba