Alte Untergath 40 · D-47805 Krefeld
Phone +49(0)2151/375-5
Fax +49(0)2151/375-95900

CEO: Harald M. Koch
Registered office: Krefeld
Registration office: Krefeld HRB 5401
VAT No. DE811215968

This email address is being protected from spambots. You need JavaScript enabled to view it.

> Contact


Properties of the belts

  • Belts with interlaced bars have a very large open area, and thus nearly unlimited penetration of air, liquids or coating materials.
  • Small dead weight.
  • The belt consists of just one level, therefore low risk of blinding, as well as good cleaning possibilities.
  • All round grooved end rollers allow smooth belt guidance.
  • Toothed rollers enable a form-locking drive.
  • Return on very small radius is possible.
  • Very smooth-running.

Dimensions & materials

(standard values)
Wire diameter 0,90 mm 2,80 mm
Pitch 4,00 mm 19,05 mm


  • Spring steel
  • Stainless steel 1.4310
  • Further materials on request


Possible belt edges and other applications

Bild_02 Bild_03 Bild_04
Single belt edge S Single belt edge B (preferable) Reinforcement edge V with belt edge S


Standard values for belt edge width:

Wire diameter
in mm
Belt edge (AK)
S in mm
Belt edge (AK)
B in mm
0,90 3,60 6,10
1,00 3,50 6,00
1,25 4,20 7,70
1,40 4,60 9,20
1,60 4,90 9,40
1,80 5,20 9,20
2,00 7,00 13,00
2,35 --- 13,60
2,80 8,20 13,20


  • Belts with interlaced bars can be provided with cams or troughs in different forms as scrapers, spacers or supports.
  • Division of the mesh length through additional bends, which results in a larger supporting area.
  • Formation of curved belt for different radii.


Bild_05 Bild_06 Bild_07
3 peaked cams per mesh Division of the mesh in the level Curved belt


Possible applications

  • Feeding, further conveying and delivery
  • Coating machines
  • Baking ovens
  • Crumb machines
  • Fryers
  • Cooling tunnel
  • Packaging machines
  • Spraying and varnishing machines
  • Driers

This listing mentions only the most frequent applications.


Examples of possible applications

Bild_08 Bild_09
In a chocolate coating machine Discharge belt in a bakery
Bild_10 Bild_11
Employment in a drier for fleece Cooling section for plastic parts



Further information can be obtained as PDF-File download. (649 KB)

FaLang translation system by Faboba